กรุณาใช้ตัวระบุนี้เพื่ออ้างอิงหรือเชื่อมต่อรายการนี้: http://cmruir.cmru.ac.th/handle/123456789/1239
ชื่อเรื่อง: การผลิตเชื้อเพลิงแข็งจากเศษใบไม้ (อาร์ดีเอฟ 5) เพื่อใช้เป็นพลังงานทดแทน
ผู้แต่ง/ผู้ร่วมงาน: รุ่งนภา, จุลศักดิ์
Rungnapa, Chulasak
วรพจน์, โพธาเจริญ
Worrapod, Pothacharoen
คำสำคัญ: เชื้อเพลิงจากใบไม้
เชื้อเพลิงแข็ง
อาร์ดีเอฟ 5
พลังงานทดแทน
วันที่เผยแพร่: 2561
สำนักพิมพ์: Chiang Mai Rajabhat University
บทคัดย่อ: โครงการวิจัยเรื่อง การผลิตเชื้อเพลิงแข็งจากเศษใบไม้(RDF-5) มีวัตถุประสงค์เพื่อศึกษาศักยภาพการแปรรูปของเศษใบไม้เป็นเชื้อเพลิงแข็ง (RDF-5) ภายในวิทยาลัยพัฒนาเศรษฐกิจและเทคโนโลยีชุมชนแห่งเอเชีย มหาวิทยาลัยราชภัฏเชียงใหม่ ศูนย์แม่ริม เพื่อใช้เป็นพลังงานทดแทน รวมทั้งวิเคราะห์ต้นทุนการผลิตที่เกิดขึ้น ผลการสำรวจปริมาณขยะเศษใบไม้ที่เกิดขึ้นภายในวิทยาลัยฯ พบว่า มีขยะเศษใบไม้เกิดขึ้น 1.59 ตัน/ต่อปี จึงได้นำขยะเศษใบไม้นั้นมาผลิตเป็นเชื้อเพลิงแข็ง (RDF-5) ซึ่งประกอบด้วย 4 ขั้นตอน ได้แก่ 1) การคัดแยกขยะ 2) การลดขนาดเศษใบไม้ 3) การผสมเศษใบไม้กับตัวประสานคือแป้งมัน โดยในขั้นตอนนี้ได้ทดลองผสมแป้งมันในอัตราส่วนต่างๆ ที่ 0% , 2% และ 4 % ต่อน้ำหนักของเศษใบไม้ เพื่อหาอัตราส่วนการผสมที่เหมาะสม และ 4) การอัดแท่ง จากนั้นนำเชื้อเพลิงแข็ง (RDF-5) ที่ได้ไปทดสอบคุณสมบัติของเชื้อเพลิง ด้วยวิธีแบบประมาณ (Proximate Analysis ) ตามวิธีมาตรฐาน ASTM 3172 และทดสอบประสิทธิภาพของเชื้อเพลิง ด้วยวิธีทดสอบการเดือดของน้ำ (Water boiling test) กับเตาอั้งโล่ ทั้งนี้จากผลการทดสอบทั้ง 2 แบบ พบว่า การผสมแป้งมันในอัตราส่วน 2% โดยน้ำหนัก มีความเหมาะสมที่สุด เมื่อเปรียบเทียบกับ RDF-5 (แป้งมัน 0%) และ RDF-5 (แป้งมัน 4%) เนื่องจากค่าที่ได้จากการวิเคราะห์ ได้แก่ ค่าสารระเหยได้ ค่าคาร์บอนคงตัว และค่าความร้อน อยู่ในปริมาณที่เหมาะสม ในขณะที่ผลการทดสอบการเดือดของน้ำให้ผลที่ไม่แตกต่างกัน สำหรับปริมาณพลังงานไฟฟ้าที่ต้องใช้ในการผลิตเชื้อเพลิงแข็งจากเศษใบไม้ (RDF-5) พบว่า มีการใช้พลังงานไฟฟ้าเฉลี่ย 0.39 kWh/kg โดยขั้นตอนการอัดแท่งมีปริมาณการใช้พลังงานที่สูงที่สุด คิดเป็น 94.6% รองลงมาคือขั้นตอนการย่อยใบไม้ 3.64% และขั้นตอนการผสม 1.8% ตามลำดับ ในส่วนของต้นทุนในการผลิตเชื้อเพลิงแข็งจากเศษใบไม้ (RDF-5) ต่อหน่วย พบว่า ต้นทุนในการผลิตขึ้นอยู่กับอัตราส่วนของปริมาณของแป้งมันที่เป็นตัวประสาน โดยต้นทุนต่อหน่วยของ RDF-5 ในอัตราส่วนของแป้งมันที่ 2% เท่ากับ 8.75 บาทต่อกิโลกรัม
รายละเอียด: This study (Producing Refuse derived fuel (RDF-5) from wasted dried leaves) mainly aims to determine process and potential of transforming wasted dries leaves in our campus to RDF-5. This fuel can be used as and alternative energy source:renewable energy. Moreover, the study also determines cost of the production. According to the observation, approximately, 1.59 tons of wasted dries leaves can be found and collected at adiCET (Asian Development College for Community Economy and Technology, Chiang Mai Rajabhat University, Chiang Mai, Thailand) per annum. Therefore, it is sufficient for being used as a source for producing RDF-5. To produce RDF-5 as expected, the process comprise 4 steps namely; (1) waste sorting (2) shredding (3) mixing and (4) extruding. In the process of “Mixing”, various composition ratios of tapioca flour and feedstock were tested (The candidate ratio of tapioca flour of 0%, 2% and 4% to dried leaves by weigh were examined). After processing, the RDF-5 characteristics were examined by using “Proximate Analysis” with accordance to ASTM 3172 and “Water boiling test”. Both approaches find that with 2% of tapioca flour by weight to the feedstocks is the most appropriate ratio due to giving the most appropriate. In addition, the study illustrates that the production process approximately consumes 0.39 kWh/kg of electricity. According to that consumption, it is found that “Extruding process” consumes most energy of 94.6% while “Shredding” and “Mixing” consume 3.64% and 1.8%, respectively. Lastly, the study also determines the unit cost of the production. It is found that the production cost highly depends on the ratio of tapioca flour as cohesive substance. With 2% of tapioca flour used by weight, the production costs 8.75 Baht/Kg.
URI: http://cmruir.cmru.ac.th/handle/123456789/1239
ปรากฏในกลุ่มข้อมูล:Research Report

แฟ้มในรายการข้อมูลนี้:
แฟ้ม รายละเอียด ขนาดรูปแบบ 
Cover.pdfCover489.02 kBAdobe PDFดู/เปิด
Abstract.pdfAbstract903.76 kBAdobe PDFดู/เปิด
Content.pdfContent499.32 kBAdobe PDFดู/เปิด
Chapter-1.pdfChapter-1415.71 kBAdobe PDFดู/เปิด
Chapter-2.pdfChapter-2681.64 kBAdobe PDFดู/เปิด
Chapter-3.pdfChapter-31.24 MBAdobe PDFดู/เปิด
Chapter-4.pdfChapter-43.18 MBAdobe PDFดู/เปิด
Chapter-5.pdfChapter-5425.18 kBAdobe PDFดู/เปิด
Bibliography.pdfBibliography395.97 kBAdobe PDFดู/เปิด
Appendix.pdfAppendix1.42 MBAdobe PDFดู/เปิด


รายการทั้งหมดในระบบคิดีได้รับการคุ้มครองลิขสิทธิ์ มีการสงวนสิทธิ์เว้นแต่ที่ระบุไว้เป็นอื่น