Please use this identifier to cite or link to this item:
http://cmruir.cmru.ac.th/handle/123456789/2208
Title: | การสังเคราะห์และวิเคราะห์วัสดุชีวภาพนาโนเกรนที่มีไฮดรอกซี อะพาไทต์เป็นองค์ประกอบหลัก |
Other Titles: | Synthesis and Analysis of Nanograins Biomaterials Based on Hydroxyapatite |
Authors: | อนิรุทธิ์, รักสุจริต Raksujarit, Anirut |
Keywords: | ผงนาโน Nanopowders วัสดุนาโน Nanomaterials วัสดุผสมนาโน Nanocomposites |
Publisher: | Chiang Mai Rajabhat University |
Abstract: | Characterization of hydroxyapatite (HA) nanopowder that prepared from cattle bone was carried out by X-ray diffraction (XRD). Chemical analysis was done using an Energy dispersive X-ray spectrophotometry (EDS). The XRD patterns of hydroxyapatite powder correspond to that of pure hydroxyapatite phase (JCPDS File No.9432). The result of the chemical analysis determined the Ca/P molar ratio; it was 1.66. Improvements of the mechanical properties of hydroxyapatite ceramics were achieved by rate-controlled sintering (RCS) method. The green compacted pellets of all HA powders were subsequently sintered at 1150C 1200C 1250C and1300C for 3 hours, respectively, by rate-controlled sintering (RCS) compared to conventional sintering method. The physical and mechanical characterizations as well as microstructural evaluation have been performed in order to determine the optimum sintering conditions. Finally, the best of mechanical properties of hydroxyapatite ceramics were: average flexural bending strength 288 ± 4.6 MPa and average fracture toughness (K1C) 5.6 ± 0.1 MPa.m1/2 for a material sintered at 1200C.by rate-controlled sintering (RCS) method. |
Description: | ผงนาโนไฮดรอกซีอะพาไทต์ที่เตรียมได้จากกระดูกควาย ได้ทำการวิเคราะห์ด้วยเทคนิคการเลี้ยวเบนของรังสีเอกซ์ และทำการหาส่วนประกอบทางเคมีด้วยเทคนิคการวัดการกระจายของรังสีเอกซ์ พบว่าแบบอย่างการเลี้ยวเบนของรังสีเอกซ์สอดคล้องเป็นอย่างดีกับแบบอย่างการเลี้ยวเบนของรังสีเอกซ์จากแฟ้มข้อมูลหมายเลข 9-432 ของไฮดรอกซีอะพาไทต์ที่บริสุทธิ์ และมีอัตราส่วนต่อโมลของ Ca/P เท่ากับ 1.66 การปรับปรุงสมบัติเชิงกลของเซรามิกไฮดรอกซีอะพาไทต์ที่เตรียมได้จากกระดูกควาย ทำได้โดยการเผาซินเตอร์แบบ rate-controlled sintering (RCS) โดยนำเม็ดตัวอย่างหลังการขึ้นรูปด้วยวิธีการอัดแล้วไปเผาซินเตอร์ที่อุณหภูมิ 1150C 1200C 1250C และ 1300C เป็นเวลา 3 ชั่วโมง เปรียบเทียบกับวิธีการเผาซินเตอร์แบบดั้งเดิม นำชิ้นงานตัวอย่างไปทดสอบสมบัติเชิงกลและตรวจสอบโครงสร้างทางจุลภาค เพื่อหาเงื่อนไขของการเผาซินเตอร์ที่ดีที่สุด สุดท้ายจะได้เซรามิกนาโนไฮดรอกซีอะพาไทต์ที่มีสมบัติเชิงกลที่ดีที่สุดจากเผาซินเตอร์แบบ rate-controlled sintering (RCS) ที่อุณหภูมิ 1200C โดยมีความทนทานต่อการกดดัดเฉลี่ย 288 ± 4.6 MPa และความทนทานต่อการแตกหักเฉลี่ย 5.6 ± 0.1 MPa.m1/2 |
URI: | http://cmruir.cmru.ac.th/handle/123456789/2208 |
Appears in Collections: | Research Report |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Bibiliography.pdf | Bibiliography (บรรณานุกรม) | 232.26 kB | Adobe PDF | View/Open |
Chapter1.pdf | Chapter1 (บทที่1) | 321.3 kB | Adobe PDF | View/Open |
Chapter2.pdf | Chapter2 (บทที่2) | 973.4 kB | Adobe PDF | View/Open |
Chapter3.pdf | Chapter3 (บทที่3) | 489.09 kB | Adobe PDF | View/Open |
Chapter4.pdf | Chapter4 (บทที่4) | 2.06 MB | Adobe PDF | View/Open |
Chapter5.pdf | Chapter5 (บทที่5) | 207.33 kB | Adobe PDF | View/Open |
Content.pdf | Content(สารบัญ) | 609.3 kB | Adobe PDF | View/Open |
Cover.pdf | Cover(ปก) | 89.94 kB | Adobe PDF | View/Open |
Abstract.pdf | Abstract (บทคัดย่อ) | 274.59 kB | Adobe PDF | View/Open |
Appendix.pdf | Appendix (ภาคผนวก) | 258.56 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.